2-THIENYLZINC BROMIDE
2-Thienylzinc bromide
CAS: 45438-80-0
Molecular Formula: C4H3BrSZn
2-THIENYLZINC BROMIDE - Names and Identifiers
2-THIENYLZINC BROMIDE - Physico-chemical Properties
| Molecular Formula | C4H3BrSZn |
| Molar Mass | 228.43 |
| Density | 0.973g/mLat 25°C |
| Flash Point | 1°F |
| Water Solubility | Reacts with water. |
| Exposure Limit | ACGIH: TWA 50 ppm; STEL 100 ppm (Skin)OSHA: TWA 200 ppm(590 mg/m3)NIOSH: IDLH 2000 ppm; TWA 200 ppm(590 mg/m3); STEL 250 ppm(735 mg/m3) |
| Storage Condition | 2-8°C |
| Sensitive | Air Sensitive |
2-THIENYLZINC BROMIDE - Risk and Safety
| Risk Codes | R11 - Highly Flammable R19 - May form explosive peroxides R36/37 - Irritating to eyes and respiratory system. R40 - Limited evidence of a carcinogenic effect |
| Safety Description | S16 - Keep away from sources of ignition. S29 - Do not empty into drains. S33 - Take precautionary measures against static discharges. S36/37 - Wear suitable protective clothing and gloves. S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. |
| UN IDs | UN 3399 4.3/PG 2 |
| WGK Germany | 1 |
| HS Code | 29319090 |
| Hazard Class | 4.3 |
2-THIENYLZINC BROMIDE - Introduction
2-Thienylzinc bromide is an organic compound with the chemical formula C4H3BrS Zn. The following is a description of the nature, use, preparation and safety information of 2-Thienylzinc bromide:
Nature:
-Appearance: 2-Thienylzinc bromide is a white to pale yellow solid.
-Solubility: Can be dissolved in organic solvents such as ether and dichloromethane.
-Stability: It is air-sensitive, so it needs to be treated under inert gas.
Use:
-Synthesis: 2-Thienylzinc bromide is an important reagent in organic synthesis. It can be used to synthesize other organic molecules, such as organometallic compounds or compounds containing thiophene groups.
-Catalyst: 2-Thienylzinc bromide is also used as a catalyst for cross-coupling reactions, such as the Tokner metal addition reaction.
Preparation Method:
- 2-Thienylzinc bromide can be prepared by reacting thiophene with ethyl zinc bromide. The thiophene was first reacted with copper iodide and then with ethylzinc bromide under an inert atmosphere to give finally 2-Thienylzinc bromide.
Safety Information:
Dust and vapours from the-2-Thienylzinc bromide may cause irritation and damage to the eyes, skin and respiratory system. Care should therefore be taken to avoid contact and inhalation.
-Wear appropriate protective gloves, goggles and protective mask during use and handling.
-During storage and handling, it is necessary to maintain a well-ventilated work area and avoid sparks and open flames.
Please note that this information is for informational purposes only and consult the relevant scientific literature and safety manuals before use for accurate information on nature, use and safety.
Nature:
-Appearance: 2-Thienylzinc bromide is a white to pale yellow solid.
-Solubility: Can be dissolved in organic solvents such as ether and dichloromethane.
-Stability: It is air-sensitive, so it needs to be treated under inert gas.
Use:
-Synthesis: 2-Thienylzinc bromide is an important reagent in organic synthesis. It can be used to synthesize other organic molecules, such as organometallic compounds or compounds containing thiophene groups.
-Catalyst: 2-Thienylzinc bromide is also used as a catalyst for cross-coupling reactions, such as the Tokner metal addition reaction.
Preparation Method:
- 2-Thienylzinc bromide can be prepared by reacting thiophene with ethyl zinc bromide. The thiophene was first reacted with copper iodide and then with ethylzinc bromide under an inert atmosphere to give finally 2-Thienylzinc bromide.
Safety Information:
Dust and vapours from the-2-Thienylzinc bromide may cause irritation and damage to the eyes, skin and respiratory system. Care should therefore be taken to avoid contact and inhalation.
-Wear appropriate protective gloves, goggles and protective mask during use and handling.
-During storage and handling, it is necessary to maintain a well-ventilated work area and avoid sparks and open flames.
Please note that this information is for informational purposes only and consult the relevant scientific literature and safety manuals before use for accurate information on nature, use and safety.
Last Update：2024-04-10 22:29:15
Supplier List
Spot supply
Product Name: 2-Thienylzinc bromide solution Request for quotationCAS: 45438-80-0
Tel: 400-968-2212
Email: 3623107365@qq.com
Mobile: 18916960931
QQ: 3623107365
Wechat: 18916960931
Spot supply
Product Name: 2-Thienylzinc bromide solution Visit Supplier Webpage Request for quotationCAS: 45438-80-0
Tel: +86-18821248368
Email: Int06@meryer.com
Mobile: +86-18821248368
QQ: 495145328
WhatsApp: +86-18821248368
Spot supply
Product Name: 2-Thienylzinc bromide solution Visit Supplier Webpage Request for quotationCAS: 45438-80-0
Tel: +86-400-900-4166
Email: product@acmec-e.com
Mobile: +86-18621343501
QQ: 2881950922
Wechat: 18621343501
WhatsApp: +86-18621343501
Spot supply
Product Name: 2-Thienylzinc bromide solution Request for quotationCAS: 45438-80-0
Tel: 400-968-2212
Email: 3623107365@qq.com
Mobile: 18916960931
QQ: 3623107365
Wechat: 18916960931
Spot supply
Product Name: 2-Thienylzinc bromide solution Visit Supplier Webpage Request for quotationCAS: 45438-80-0
Tel: +86-18821248368
Email: Int06@meryer.com
Mobile: +86-18821248368
QQ: 495145328
WhatsApp: +86-18821248368
Spot supply
Product Name: 2-Thienylzinc bromide solution Visit Supplier Webpage Request for quotationCAS: 45438-80-0
Tel: +86-400-900-4166
Email: product@acmec-e.com
Mobile: +86-18621343501
QQ: 2881950922
Wechat: 18621343501
WhatsApp: +86-18621343501
View History
2-THIENYLZINC BROMIDE
63-75-2
Lead bromide (PbBr2)
CI 11115
NEVILLE WINTHER ACID
ETHYL (P-FLUOROBENZOYL)ACETATE
Sodium picosulfate
CsTFSI
63-75-2
Lead bromide (PbBr2)
CI 11115
NEVILLE WINTHER ACID
ETHYL (P-FLUOROBENZOYL)ACETATE
Sodium picosulfate
CsTFSI